BLT World has added the Scrapetec PrimeTracker belt tracker to its range to eliminate problems associated with conveyor belt systems, including misalignment, abrasion and belt damage.
“For optimum performance of a conveyor system, it is critical that the belt always runs straight on the conveyor, without sideways movement. Our new belt tracker has been designed to automatically guide a conveyor belt back into the correct straight-line position, to prevent costly downtime and component replacement,” explains Ken Mouritzen, managing director, BLT World.
“An advantage of the Scrapetec PrimeTracker is that it is operates in the idling position at all times, unless there is sideways movement of the belt. This system corrects misalignment immediately, by guiding the belt back into the correct position, with no damage or abrasion to the belt or tracker.
“This is unlike conventional belt trackers that slide over the belt surface causing possible abrasion and belt damage – rather than adopting free rotation. Conventional belt trackers, with tapered edges, never idle and are always in a braking mode.
“What’s also notable, is the cylindrical shape and pivot bush that allow this belt tracker to swing and tilt during operation and to always be in full contact with the belt. Added to this, the Scrapetec PrimeTracker has the same peripheral speed over the entire surface of the belt, where traditional crowned rollers have different speeds at the centre and edges of the system.”
Other advantages include easy installation, low maintenance requirements and protection of belt edges and structure of the conveyor belt. A strong corrugated EPDM rubber hose protects this system from dust and sand, while the rubber pivot offers soft suspension of the tracker shaft, ensuring extended service life of the system. This system can be installed in front of every return pulley, above and below the belt.
BLT World also supplies and supports Scrapetec products for conveyor systems, which are designed to prevent dust formation, reduce material spill, enable thorough belt-cleaning and minimise the risk of explosion.
Ken Mouritzen, Managing Director, BLT World
Telephone (031) 274-8270
Email ken@bltworld.com
Web www.bltworld.com